Clamp AC Leakage Current Sensor Power Factor clamp Meter Range AC 0mA to 100A Resolution 1mA 3.5mm Audio Plug Color Red and Black

Features:Clamp leakage current sensor, suitable for AC leakage current, current, high harmonic current, phase, power, power, power factor and other detection. Measuring range: 0mA~500A, jaw size is 35mm x 40mm. The current clamp uses a special core Specification CT size : 35mm x 40mm Range : AC 0mA～100A Resolution : 1mA Accuracy: ±2.0%FS(50Hz/60Hz;23°C±2°C) Linearity : ≤1.0% Phase error : ≤3°(50Hz/60Hz; 23°C±2°C) Reference load: RL: 0mA～500mA≤500Ω; 0.5A～5A≤50Ω; 5A～50A≤5Ω; 50A～500A≤0.5Ω Standard Deuterium ratio : 4000:1 (customer ratio can be customized upon request) Output Mode : Current Sensing Output Output Interface : Φ3.5mm Audio Plug Output line : 2-core shielded cable, line length 2m Detection method : Clamp CT Measured current frequency : 45Hz～60Hz Frequency characteristics : 10Hz～100kHz Electric field interference : about 10mA when the external electric field 100A is close to 10mm Lead position : The tested lead is in the center of the jaw Line voltage : AC 600V line test Working environment: -20°C～50°C; 80%Rh Storage environment: -10°C～60°C; 70%Rh Insulation strength : AC3700V/rms (between core and shell) Suitable for safety regulations: IEC1010-1, IEC1010-2-032, Pollution Degree 2, CAT III (600V) Clamp meter quality : 190g Appearance size: Length x width x height: 120mm×70mm×33mm

• ◆CT size : 35mm x 40mm
• ◆Range : AC 0mA～100A
• ◆Resolution : 1mA
• ◆Accuracy: ±2.0%FS(50Hz/60Hz;23°C±2°C)
• ◆Linearity : ≤1.0% Phase error : ≤3°(50Hz/60Hz; 23°C±2°C)