Engraver Motherboard 32 Bit Upgrad Cutter Controller Board Replacement with Step Motor for Makerbase MKS DLC32 V2.1
4.5 (111 items)
Limited Time SaleUS$19.90 cheaper than the new price!!
Free cash-on-delivery fees for purchases over $99
Product details
| Management number | 211766105 | Release Date | 2026/04/04 | List Price | US$13.27 | Model Number | 211766105 | ||
|---|---|---|---|---|---|---|---|---|---|
| Category | |||||||||
SpecificationItem Type: Laser Engraver MainboardMaterial: PCBModel: FOR MKS DLC32, motherboard. A4988, driver.Voltage: 12-24VDCMCU: ESP32-WROOM-32U, 32bits.MCU Frequency: 240MHzFLASH: 8192K BytesRAM: 520K BytesEngraving Speed: <=8000mm/minPC Engraving: SupportsOffline Mode: SupportsLCD: SupportsIntegrated WIFI: SupportsWeb Page Control: SupportsMobile APP Control: SupportsFor GRBLaser: SupportsFor LightBurn: SupportsA4988 Driver Features and Advantages:1. Low RDS on output.2. Automatic current attenuation mode detection or selection.3. Mixing with slow current decay mode.4. Synchronous rectification, low power consumption.5. Internal undervoltage lockout.6. Cross flow protection.7. 3.3 and 5 V compatible logic power supply.8. Thermal shutdown circuit.9. Earth fault protection.10. Load short circuit protection.11. 5 Available Stepper Modes: full step, 1/2, 1/4, 1/8, and 1/161. Package List1 x Laser Engraver Mainboard3 x Driver3 x Accessory1 x Data Cable
- Excellent Design - Adopts premium 4-layer PCB, integrates 2560 and the control board into one PCB, which makes wiring more simple and stable.
- With Stepper Motor The motherboard adopts a dedicated power chip supporting 12V-24V and multiple stepper units of 4988, 8825, TMC2208, TMC2100, suitable for LCD2004, LCD12864, for MKS TFT24, 28, 32, 35, 70.
- Ultra-High Speed Computing Ability - Due to the high-speed IO speed and the powerful timer of the main control module, the MKS DLC32 is suitable for beginners to upgrade the main board of the Makerbase wood carving machine. The speed of the tool accessories can reach 8000mm per minute, which can reach a very high carving speed.
- Easy Control The makerbase CNC engraving machine motherboard also has a mobile app function, which can be connected to MKS DLC32, control movement, edit pictures, upload files and more.
- Wide Compatibility The DLC32 offline controller is compatible with GRBLLASER and Lightburn software, which is very easy to use for all engraving machine users.
| Brand | Walfront |
|---|---|
| USB 20 | 1 |
| Platform | No Operating System |
| Model Name | WALFRONToi0kn586bf |
| Manufacturer | WALFRONT |
| Model Number | WALFRONToi0kn586bf |
| Item Type Name | Casting Machines |
| Number of Ports | 3 |
| Total Usb Ports | 1 |
| Processor Socket | LGA |
| Compatible Devices | Makerbase MKS DLC32 V2.1 |
| Compatible Processors | ESP32-WROOM-32U |
| RAM Memory Technology | DDR3L |
| Memory Slots Available | 1 |
| Graphics Card Interface | Integrated |
| Main Power Connector Type | 24-Pin |
| System Bus Standard Supported | APB |
Bestseller ranking
3D Printer Accessories
Correction of product information
If you notice any omissions or errors in the product information on this page, please use the correction request form below.
Correction Request Form