Gen2 HeatPad with 3.5 Diameter Hot Zone (400W)

Introducing the new HeatPad with an integrated K-Type TC Standard. It features a 3.5-inch hot zone, rapidly heating areas up to 1050C internally. Calibration for T/C is provided in the manual. The surface temperature can reach up to 1000C, with a voltage of approximately 40V and a maximum current of up to 11.5 Amps, depending on the load. The GEN 2 models come with special high thermal resistant glass. It includes a non-reactive CerAll ceramic pocket, has a low profile of about half an inch, and is thermal shock-resistant, featuring high-density NanoFractalAlumina translucent setter plates and crucibles (sold separately). For alumina boats, visit our Alumina pages. For HeatPad ceramic repairs, use FractalPaste. A calibrated BPAN-O-PLUS is highly recommended for high-temperature use (choices of 120v, 220/240v, and UL and non-UL rated models are offered). This electrical device can achieve very high temperatures, so please follow all local codes and safety procedures, and consult your local electrician. It can reach temperatures over 1200C, so use caution to avoid burns or fire hazards. When insulating materials are placed on the heat pad, the maximum temperature is achieved with lower currents than when it's free-radiating. All users should control the heat pad properly and not exceed the maximum rated temperature on the pad surface. It should not be used inverted. Both the maximum temperature and maximum current should be monitored. The weight will be calculated using the control panel option when checking out, and the correct weight and shipping price will be shown in the final acknowledgment from MHI.

• Included: New Internal K-Type TC Standard
• Hot Zone Diameter: 3.5 inches
• Rapid Heating: Up to 1050C internally. Manual calibration for T/C provided
• Max Surface Temp: Up to 1000C
• Voltage: Approximately 40V
• Max Current: Up to 11.5A (load-dependent). GEN 2 models feature special high thermal resistant glass
• Ceramic Pocket: Non-reactive CerAll
• Low Profile: Approximately half-inch height
• Durable Components: Thermal shock-resistant, high-density NanoFractalAlumina setter plates and crucibles (sold separately). Visit Alumina pages for boats
• Repair Paste: Use FractalPaste for HeatPad ceramic repairs
• Safety Warning: Calibrated BPAN-O-PLUS recommended at high temps. Follow local codes and consult electrician. Avoid burns and fire hazards. Monitor temp and current
• Weight Calculation: Uses control panel option during checkout
• Shipping Info: Final weight and price shown in MHI's final acknowledgment